Internal display panel, Hard disk drive – Toshiba PORTEGE R700 User Manual
Page 156
Internal display panel
Apparent computer's display panel problems may be related to the
computer's setup and configuration - please refer to chapter 7,
for further information.
Problem
Procedure
No display
Press the FN + F5 hot keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
Markings appear on
the computer's
display panel.
These marks may have come from contact with the
keyboard and Touch Pad while the display panel
has been closed. You should try to remove the
marks by gently wiping the display panel with a
clean dry cloth or, if this fails, with a good quality
LCD screen cleaner. In this latter instance you
should always follow the instructions with the
screen cleaner and always ensure you let the
display panel dry properly before closing it.
Problems above
remain unresolved
or other problems
occur
You should initially refer to the documentation
supplied with you software to determine if it is this
that is causing the problems. Alternatively you may
wish to run the TOSHIBA PC Diagnostic Tool to
check the general operation of the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Hard disk drive
Problem
Procedure
Computer does not
boot from hard disk
drive
Check to see whether that is a floppy diskette in
the floppy diskette drive or a CD/DVD in the optical
disc drive - if so remove it and try to start the
computer again.
If this has no effect, check the Boot Priority
setting within the TOSHIBA HW Setup utility -
please refer to the
7, HW Setup for further information.
Please refer to your operating system
documentation in order to determine whether there
is a problem with any of the operating system files
or settings.
PORTÉGÉ R700 / Satellite R630
8-8
User's Manual