Toshiba SATELLITE L300 - Manual (Page 78)

User’s Manual 4-18
Operating Basics
Click the Next button to perform the verification test.
9. Perform the verification test. Face the screen as you do when you
register.
■
If verification fails, click the Back button and re-register. Please refer
to step 8 from step 6.
10. If verification is successful, click the Next button and register an
account.
11. Register the account. Fill in the account registration fields.
■
Fill in the all fields.
When you have finished it, click OK button.
12. The Management screen is displayed. The registered account name
will be displayed. Clicking on it will cause the captured image of your
face to be displayed on the left.
How to Delete the Face Recognition Data
Delete image data, account information, and personal record data created
during registration. To delete the Face Recognition Data, follow the steps
as described below:
1. To launch this utility, click Start →All Programs→TOSHIBA→ Utilities
→ Face Recognition. The Management screen is displayed.
2. Select a user which is deleted in the Management screen.
3. Click the Delete button. "You are about to delete the
user data. Would you like to continue? " will be
displayed on the screen
■
If you do not want the data to be deleted, click the No button and
you will then be returned to the Management screen.
■
Clicking on the Yes button will remove the selected user from the
Management screen.
How to launch the help file
For further information on this utility, please refer to help file.
■
To launch the help file, click Start → All Programs → TOSHIBA →
Utilities → Face Recognition Help.
Windows Logon via TOSHIBA Face Recognition
This section explains how to login to Windows with TOSHIBA Face
Recognition. Two authentication modes are provided.
■
1:N Mode Login screen: If the face authentication tile is selected by
default, you can log in without using the keyboard or mouse.
■
1:1 Mode Login screen: This mode is essentially the same as 1:N
mode, but the Select Account screen will appear before the Display
Captured Image screen, and you will need to select the user account
to be authenticated in order to start the authentication process.