Starting the computer by password, Starting the computer by password -13, Installing the battery pack – Toshiba SATELLITE L300 User Manual
Page 102
User’s Manual
6-13
Power and Power-up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
1. Be sure the computer’s power is off and all cables are disconnected.
2. Insert the battery pack.
Installing the battery pack
3. Push the battery pack until it is firmly seated.
4. Slide the battery pack locking latch toward the lock position.
Starting the computer by password
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3,
. The
following message appears:
Enter Current Password
2. Enter the password.
3. Press ENTER.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Battery pack
At this point, the hot keys FN + F1 to F9 do not work. They will function
after you enter the password.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.