Tuner, Listening to the radio 9, Listening to the radio – Pioneer FH-P4100R User Manual

Page 9: Tuner 04

Black plate (9,1)

CRD3576-A

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be switched on and off. AF

should be off for normal tuning operation (re-

fer to page 13).
1 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

2 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

3 Frequency indicator

Shows to which frequency the tuner is

tuned.

4 SOURCE button

Press to select the tuner as the source.

5 BAND button

Press to select among three FM or MW/LW

bands.

6 c/d buttons (Manual or seek tuning)

Press to tune in a radio station.

7 VOLUME button

Press to increase or decrease the volume.

1 Press SOURCE to select the tuner.

Press SOURCE until you see Tuner displayed.

2 Use VOLUME to adjust the sound

level.

When you press VOLUME up/+, the volume is

raised and when pressed down/, the volume

is lowered.

3Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or MW/LW.

4 To perform manual tuning, press c

or d with quick presses.

The frequencies move up or down step by

step.

5 To perform seek tuning, press and

hold c or d for about one second and

release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing

either c or d with a quick press.
# If you press and hold c or d you can skip

broadcasting stations. Seek tuning starts as soon
as you release the buttons.

Note

When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.

Tuner

English

Section