Pioneer FH-P4100R - Manual (Page 8)

Black plate (8,1)
8 CRD3576-A
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in this unit (refer to page 23). To switch to the
cassette player, load a cassette tape in this
unit (refer to page 19).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD playerTunerCassette player
Multi-CD playerExternal unit 1Exter-
nal unit 2AUX
Notes
! In the following cases, the sound source will
not change:
When a product corresponding to each
source is not connected to this unit.
When no disc is set in this unit.
When no cassette is set in this unit.
When no magazine is set in the multi-
CD player.
When the AUX (auxiliary input) is set to
off (refer to page 46).
! External unit refers to a Pioneer product
(such as one available in the future) that,
although incompatible as a source, enables
control of basic functions by this unit. Two
external units can be controlled by this unit.
When two external units are connected, the
allocation of them to external unit 1 or
external unit 2 is automatically set by this unit.
! When this units blue/white lead is
connected to the cars auto-antenna relay
control terminal, the cars antenna extends
when this units source is switched on. To
retract the antenna, switch the source off.
Turning the unit off
% Press SOURCE and hold for at least
one second to turn the unit off.
Power ON/OFF 03
En
8
Section