Pioneer FH-P4100R - Manual (Page 13)

Black plate (13,1)
13 CRD3576-A
Switching the RDS display
When you tune in a RDS station its program
service name is displayed. If you want to know
the frequency you can.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service namePTY information
Frequency
PTY (program type ID code) information is
listed on page 18.
# PTY information and the frequency of the
current station appears on the display for eight
seconds.
# If a PTY code of zero is received from a sta-
tion, NONE is displayed. This indicates that the
station has not defined its program contents.
# If the signal is too weak for this unit to pick
up the PTY code, NO PTY is displayed.
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
! AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press a to turn AF on.
Press a and AF :ON is displayed.
3Press b to turn AF off.
Press b and AF :OFF is displayed.
Notes
! Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
! When you recall a preset station, the tuner
may update the preset station with a new
frequency from the stations AF list. (This is
only available when using presets on the F1 or
F2 bands.) No preset number appears on the
display if the RDS data for the station received
differs from that for the originally stored
station.
! Sound may be temporarily interrupted by
another program during a AF frequency
search.
! When the tuner is tuned to a non-RDS
station the AF indicator flashes.
! AF can be switched on or off independently
for each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI Seek is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
! The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 46.
RDS 05
En
13
English
Section