Limiting stations to regional, Programming 14, Receiving traffic announcements 14 – Pioneer FH-P4100R User Manual
Page 14: Receiving traffic announcements, Rds 05, Limiting stations to regional programming
Black plate (14,1)
14CRD3576-A
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
2 Press a to turn the regional
function on.
Press a and REG :ON is displayed.
3Press b to turn the regional
function off.
Press b and REG :OFF is displayed.
Notes
! Regional programming and regional
networks are organized differently depending
on the country (i.e., they may change
according to the hour, state or broadcast
area).
! The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other
networks TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP ( ) indica-
tor will light.
2 Press TA to turn traffic
announcement standby on.
Press TA and the T indicator appears in the
display. The tuner will standby for traffic an-
nouncements.
# To turn traffic announcements standby off,
press TA again.
3Use VOLUME to adjust the TA
volume when a traffic announcement
begins.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
RDS
05
En
14
Section