Pioneer FH-P4100R - Manual (Page 42)

Black plate (42,1)
42 CRD3576-A
2 Press DSP to select 9-band graphic
equalizer.
9-band graphic equalizer can only be selected
when you have selected CUSTOM equalizer
curve. Press DSP until 50Hz appears in the
display.
# If 9-band graphic equalizer has been pre-
viously adjusted, the frequency of that previously
selected will be displayed instead of 50Hz.
3Press c or d to select the equalizer
band to adjust.
Each press of c or d selects equalizer bands
in the following order:
501002004008001.6 k3.2 k
6.3k12.5 k (Hz)
Press c or d until the desired equalizer band
appears in the display.
4 Press a or b to adjust the level of
the equalizer band.
Each press of a or b increases or decreases
the level of the equalization band.
+6 6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Notes
! You can create different CUSTOM curves for
different sources.
! The built-in CD player and the multi-CD
player are set to the same equalizer
adjustment setting automatically.
! External unit 1 and External unit 2 are set to
the same equalizer adjustment setting
automatically.
Using sound field control,
octaver and BBE sound
SFC (sound field control) incorporate three
programs for reproducing typical sound fields
of a studio, jazz or club. This function makes it
possible to reproduce the realistic sound fields
of the three programs in your car.
Octaver makes the bass sound louder. OCT2
is more effective than OCT1.
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
Note
Manufactured under license from BBE Sound,
Inc. The mark BBE is a trademark of BBE Sound,
Inc.
Recalling sound field programs
Here is a list of the sound field programs:
Button Display Effect
1 STUDIO Studio
2 JAZZ Jazz
3CLUB Club
4 OCT1 Octaver 1
5 OCT2 Octaver 2
6 BBE BBE
1 Press DSP to select the sound field
control.
Press DSP until SFC appears in the display.
Digital Signal Processor 10
En
42
Section