Connecting the system 8, Connecting the units, Connecting the system – Pioneer ANH-P10MP User Manual
Page 9

Connecting the Units
En
8
English
Español
Deutsch
Français
Italiano
Nederlands
Connecting the System
GPS aerial
LIGHT GREEN LEAD AT POWER CONNECTOR IS
DESIGNED TO DETECT PARKED STATUS AND
MUST BE CONNECTED TO THE POWER
SUPPLY SIDE OF THE HANDBRAKE SWITCH.
IMPROPER CONNECTION OR USE OF THIS
LEAD MAY VIOLATE APPLICABLE LAW AND
MAY RESULT IN SERIOUS INJURY OR DAMAGE.
Light green
Used to detect the ON/OFF status of the handbrake.
This lead must be connected to the power supply side
of the handbrake switch. If this connection is made
incorrectly or omitted, certain functions of your
navigation system will be unusable.
Handbrake switch
Earth side
Power supply side
Note
The position of the handbrake switch
depends on the vehicle model. For
details, consult the vehicle owner's
manual or dealer.
WIRED REMOTE INPUT
Refer to Wired Remote Control’s manual.
(sold separately)
TEL terminal
Refer to a Handsfree Telephone Unit’s
manual. (sold separately)
Connection method
Clamp the handbrake switch
pwoer supply side lead.
Clamp firmly with needle-
nosed pliers.
This product
5m
2m10cm
GPS aerial jack
20cm
20cm
CRD3863A_inst_002-029_UK 4/9/04 2:05 PM Page 9