Pioneer ANH-P9R - Manual (Page 27)

!&
(
1
*
/,6+
1DYLJDWLRQ
‡ UDH@
The internal system clock can be set to local time.
‡ T6W@ÃQPTDUDPI
The current position can be saved and stored in the destination memory.
‡ G6IBV6B@
Language setting for the navigation system.
‡ H@6TVSDIBÃVIDU
The display units can be changed from metres to yards.
‡ 6IIPVI8@H@IUÃ@U6
Announcement of the estimated time of arrival can be switched on / off.
‡ @U6Ã86G8VG6UDPI
This setting controls the estimated average speed when driving on a motorway.
Tr‡‡vtÇurÇv€r
In order to achieve correct navigation on routes requiring guidance under time
restrictions and to calculate the estimated time of arrival, it is necessary to set the GMT
time transmitted from satellites to the current time zone.
By pressing the rotary stick or the multifunction button the time set is accepted.
The program returns to the system settings menu.
Select “TIME” in the system settings
menu and confirm.
Using the multifunction button or
the time can be changed from
the 24 hour to the 12 hour display.
Using the multifunction buttons
or the time is changed every half
an hour.
Th‰vtÇur†v‡v‚
Confirm again by pressing the I6WDPF button.
Press the I6WDPF button for more than 2 seconds to confirm the name entered. To
confirm, the small tick can also be marked and the rotary stick briefly pressed.
The destination memory is automatically requested (see page 25).
Select the desired position in the destination memory using the rotary stick and press
the
I6WDPF button to confirm.
Using the multifunction button or
the time can be changed from
the 24 hour to the 12 hour display.
Select “SAVE POSITION” in the system
settings menu and confirm.
The current position, in degrees of
longitude and latitude, is displayed.
Enter the name of the position.
MAN-ANH-P9R-GB.fm Page 27 Tuesday, June 4, 2002 1:39 PM