Pioneer ANH-P9R - Manual (Page 23)

!"
(
1
*
/,6+
1DYLJDWLRQ
Ds‚ €h‡v‚Ã€rˆ)
For inactive route guidance, the information menu can be requested by pressing the
WPD8@ button.
More detailed information on the individual announcements can be requested in the
list of current traffic information.
A selection can be made by turning the rotary stick and pressing the I6WDPF button
to confirm.
After the desired traffic information has been confirmed, the information is displayed
in full. A typical traffic announcement consists of:
‡ a motorway or road number
‡ approximate direction information
‡ detailed location and direction information
‡ the incident
‡ the cause, if known
Pressing the Ã768F button, switches back to the list of current traffic information.
Press the multifunction button .
A list of currently available traffic
information is displayed.
The scroll marks at the left edge of the
display indicate that additional traffic
information is available.
If scroll marks are visible at the left edge
of the display, then more than 3 lines are
used to display the traffic information.
,QIRUPDWLRQ GXULQJ URXWH JXLGDQFH
To return to route guidance, press the DIAP button again or wait for 8 seconds.
Sr„ˆr†‡vtÃw‚ˆ r’Ãqˆ h‡v‚ÃhqÃxvy‚€r‡ r†Ã‡ h‰ryyrq
During route guidance, press the DIAP button.
The information for journey duration, kilometres travelled and the average speed can
also be requested as previously described, provided that the destination flag waves
after the destination has been reached.
Press the DIAP button.
The destination, the distance and the
estimated time of arrival are displayed.
If a stopover has been specified, the
stopover is displayed. The main
destination can be displayed via the
multifunction button
.
Press the multifunction button .
The journey duration, kilometres
travelled and the average speed are
displayed. Pressing the
I6WDPF
button, returns to the route guidance
display.
MAN-ANH-P9R-GB.fm Page 23 Tuesday, June 4, 2002 1:39 PM