Displaying dns attack protection information, Displaying dns dpi policy counters – Brocade Communications Systems ServerIron ADX 12.4.00a User Manual
Page 60

46
ServerIron ADX Security Guide
53-1002440-03
DNS attack protection
1
This command enables DNS content switching.
Configuring global commands for DNS attack protection
You can optionally configure the following to apply to all DNS attack protection configurations:
•
Dropping all DNS packets that are fragmented
•
Dropping all DNS packets with multiple queries
•
Dropping all DNS packets that are malformed
To configure a ServerIron ADX to drop all DNS packets that are fragmented, use the server dns-dpi
drop-frag-pkts command as shown.
ServerIron(config) server dns-dpi drop-frag-pkts
Syntax: [no] server dns-dpi drop-frag-pkts
To configure a ServerIron ADX to drop all DNS packets with multiple queries, use the server dns-dpi
drop-multiple-query-pkts command as shown.
ServerIron(config) server dns-dpi drop-multiple-query-pkts
Syntax: [no] server dns-dpi drop-multiple-query-pkts
To configure a ServerIron ADX to drop all DNS packets that are malformed, use the server dns-dpi
drop-incomplete-malformed-pkts command as shown.
ServerIron(config) server dns-dpi drop-incomplete-malformed-pkts
Syntax: [no] server dns-dpi drop-incomplete-malformed-pkts
Configuring the ADX to drop requests if servers in redirect actions are down
You can configure the ServerIron ADX to drop requests if servers in redirect actions are down as
shown.
ServerIron(config-csw-pol-p1) dns-drop-on-fwd-fail
Syntax: [no] dns-drop-on-fwd-fail
Configuring the ADX to evaluate rules without query name first
You can configure the ServerIron ADX to evaluate rules without query name first as shown.
ServerIron(config-csw-pol-p1) evaluate-generic-first
Syntax: [no] evaluate-generic-first
Displaying DNS attack protection information
The following information can be displayed regarding DNS attack protection.
•
DNS DPI policy counters
•
IP addresses held down by a rate limit action
DIsplaying DNS DPI policy counters
DNS DPI policy counters can be displayed for a specified DNS policy as shown.