Configuring a rule for ipv6 icmp types, Table 16 – Brocade Communications Systems ServerIron ADX 12.4.00a User Manual
Page 145

ServerIron ADX Security Guide
131
53-1002440-03
DDoS protection
5
Configuring a rule for IPv6 ICMP types
ServerIron ADX has a set of built-in rules to manage IPv6 icmp types. In this case, the rule
command is used with a <icmp-option> variable specified in Table 16.
The following example configures the "filter4" security filter with a rule to drop packets that
acontain the icmpv6-option type echo-reply.
ServerIronADX(config)# security filter filter4
ServerIronADX(config-sec-filter4)#rule icmp-type echo-reply drop
Syntax: [no] rule ip-option
The
The log parameter directs the ServerIron ADX to drop traffic on the bound interface that matches
the rule specified by the configured
The drop parameter directs the ServerIron ADX to drop traffic on the bound interface that matches
the rule specified by the configured
icmp-type router-advertisement
icmp type 9: router-advertisement
icmp-type r outer-selection
icmp type 10: router-selection
icmp-type source-quench
icmp type 4: source-quench
icmp-type time
icmp type 11: time-exceeded
icmp-type timestamp
icmp type 13: timestamp
icmp-type timestamp-reply
icmp type 14: timestamp-reply
TABLE 15
icmp option types and descriptions
TABLE 16
ICMPv6 types and descriptions
Attack Type
Description
cpa
ICMP type 149: Certification Path Advertisement.
cps
ICMP type 148: Certification Path Solicitation
echo-reply
ICMP type 129: echo-reply
echo-request
ICMP type 148: echo-request
mra
ICMP type 151: Multicast Router Advertisement
mrs
ICMP type 152: Multicast Router Solicitation
mrt
ICMP type 153: Multicast Router Termination
neighbor-advertisement
ICMP type 136: neighbor-advertisement
neighbor-solicitation
ICMP type 135: neighbor-solicitation
private
ICMP type 200: Private experimentation
private1
ICMP type 201: Private experimentation
redirect-message
ICMP type 137: redirect-message