Before turning on the power, Bundling the cables, Before turning on the power bundling the cables – Pioneer KRL-46V User Manual
Page 16: Quick guide, Supplying power to the aerial, Ferrite core

Quick guide
Before turning on the power
Bundling the cables
(For U.K. and Eire)
Carefully insert the
CA Module in the
Common Interface
slot with the contact
side forward.
The logo on the CA
Module must be
facing forward from
the rear of the TV.
1�
2�
Cable clamp
Bundle the cables with
the clamp.
AC cord
Place the TV close to the
AC outlet, and keep the
power plug within reach.
Standard DIN45325
plug (IEC 169-2)
75 q coaxial cable
(For Europe, except
U.K. and Eire)
Supplying power to the aerial
You must supply power to the aerial in order to
receive digitally/terrestrially broadcast stations after
connecting the aerial cable to the ANT terminal on
the rear of the TV.
Press h and the “HOME MENU” screen displays.
Press a/b to select “Setup”.
Press a/b to select “Antenna Setup-DIGITAL”, and
then press
enter.
Press a/b to select “Supply Voltage”, and then press
enter.
Press c/d to select “On”, and then press
enter.
1�
2�
3�
4�
5�
* Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
Ferrite Core*
KRL46V_GB.indd 14
2008/07/09 14:08:43