Pioneer AVM-P9000R - Manual (Page 83)

82
Fine Adjusting Audio (Expert)
Storing the Adjusted Cabin EQ into Memory
Once you have adjusted a Cabin EQ, you can store it into memory.
1. Select “Custom MEMO” by moving the joy-
stick.
“Custom MEMO” is highlighted in green.
2. Click the joystick.
Your adjusted cabin EQ has been stored into memory,
and car type changes to “CUSTOM” in the lower left-
hand corner of the screen.
Note:
• You can perform the above steps as many times as you want in the process of customizing a
cabin EQ. Each time you do so, the “Custom MEMO” is updated.
Reset Adjusted Cabin EQ
You can switch a tailored Cabin EQ back to its initial setting status.
You need to select a Cabin EQ (type of car) to be reset first. (Refer to “Cabin Equalizer” on
page 66.)
1. Select “Cabin Reset” by moving the joystick.
“Cabin Reset” is highlighted in green.
2. Click the joystick.
The customized EQ is erased and the type of car
displayed in the lower left-hand corner of the screen,
that was highlighted in orange, is grayed out.