Pioneer AVM-P9000R - Manual (Page 46)

45
Multi-CD Player Multi-CD Player
Basics
Selecting the Multi-CD Player
Select the “Multi-CD” as source by
pressing the SOURCE button as many
times as necessary.
The player starts playing automatically.
Track Search and Fast Forward/Reverse
You can select between Track Search or Fast Forward/Reverse by changing the
length of time you hold the small joystick left/right.
Track Search Less than 0.5 seconds
Fast Forward/Reverse Continue pressing
Note:
• The Multi-CD player may perform a preparatory operation, such as verifying the presence of a
disc or reading disc information, when the power is turned ON or a new disc is selected for play-
back. “READY” is displayed.
• If the Multi-CD player cannot operate properly, an error message such as “ERROR-14” is dis-
played. Refer to the Multi-CD player owner’s manual.
• If there are no discs in the Multi-CD player magazine, “NO DISC” is displayed.
Disc Search
You can select discs by moving the small joystick
up/down.
Disc Number Search (for 6-Disc, 12-Disc types)
You can select discs directly with the 1 to 6 buttons.
Just press the number corresponding to the disc
you want to listen to.
Note:
• When a 12-Disc Multi-CD Player is connected and you
want to select disc 7 to 12, press the 1 to 6 buttons for 2
seconds.
Track Number
Disc Number Play Time