Pioneer AVM-P9000R - Manual (Page 111)

110
Installation/Specifications
Specifications
General
Power source ...... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system .................................... Negative type
Max. current consumption
Backup current ................................................ 10 A
Accessory current .............................................. 4 A
Dimensions ................ 307 (W)
× 51 (H) × 187 (D) mm
Weight .................................................................. 2.5 kg
Amplifier
Maximum power output .................................. 45 W
× 6
Continuous power output ................................ 22 W
× 6
(DIN45324, +B=14.4 V)
Load impedance ........................ 4
Ω (4 – 8 Ω allowable)
Preout maximum output level/output
impedance .............................................. 2.2 V/1 k
Ω
Decoder
.... Linear PCM/Dolby Digital/Dolby Pro Logic/DTS
Equalizer (3-Band Parametric Equalizer)
(Low) ...................... Frequency: 40/80/100/160 Hz
(Mid) ........................Frequency: 200/500/1k/2k Hz
(High) .............. Frequency: 3.15k/8k/10k/12.5k Hz
Level ............................................................ ±12 dB
Subwoofer output
Crossover frequency .......... 63 Hz, 100 Hz, 200 Hz
Level ............................................................ ±10 dB
Speaker setting
Time Alignment ...................... 0 – 500 cm (2.5 cm)
Level ............................................................ ±10 dB
Equalizer ............................................ Band: 3 Band
Frequency: 100/125/160/200/250/315/
400/500/630/800/1k/1.25k/
1.6k/2k/2.5k/3.15k/4k/
5k/6.3k/8k Hz
Gain: ±12 dB
Crossover frequency: 63, 100, 200 Hz
FM tuner
Frequency range .................................... 87.5 – 108 MHz
Usable sensitivity ................................................ 11 dBf
(1.0 µV/75
Ω, mono, S/N: 30 dB)
50 dB quieting sensitivity .................................... 16 dBf
(1.7 µV/75
Ω, mono)
Signal-to-noise ratio .................. 70 dB (IEC-A network)
Distortion ...................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response .................. 30 – 15,000 Hz (±3 dB)
Stereo separation .................... 40 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ...................... 531 – 1,602 kHz (9 kHz)
Usable sensitivity ............................ 18 µV (S/N: 20 dB)
Selectivity .............................................. 50 dB (±9 kHz)
LW tuner
Frequency range ...................................... 153 – 281 kHz
Usable sensitivity ............................ 30 µV (S/N: 20 dB)
Selectivity .............................................. 50 dB (±9 kHz)
Video
Composit input level ........................................ 1 V/75
Ω
PAL/SECAM/NTSC Compatible
Composit output level ...................................... 1 V/75
Ω
PAL/SECAM/NTSC Directly Through Input
Note:
• Specifications and the design are subject to
possible modification without notice due to
improvements.