Pioneer AVM-P9000R - Manual (Page 68)

67
Position Selector
One way to assure a more natural sound is to clearly position the stereo sound image (putting
you in the center of the sound field).
About the Position Selector
• The Position Selector function is a feature that automatically adjusts the speakers’ output levels and
inserts a delay time into the speakers’ outputs depending on seats passengers occupy and the num-
ber of them. When used in conjunction with the Cabin EQ and SFC, the feature will make the
sound image more natural and offer a panoramic sound that envelops you.
1. Select “Position Selector” by moving the joy-
stick.
“Position Selector” is highlighted in green.
2. Click the joystick.
The Audio Setting Menu appears, with “Position”
highlighted in green.
3. Click the joystick again.
Each click changes listening position in the following
order:
Front Left
= Front Right = Front Left & Right
= Rear Left = Rear Right = Rear Left & Right
= All Seats = Off
Note:
• For Time Alignment to be made, you need to have set the listening position to either of the
Front Left or Right, or of the Rear Left or Right.
Balance Adjustment
This function allows you to select a Fader/Balance setting that provides ideal listening condi-
tions in all occupied seats.
1. Select “FAD/BAL” by moving the joystick.
“FAD/BAL” is highlighted in green.
2. Click the joystick.
The Audio Setting Menu appears, with “FAD/BAL”
highlighted in green.
3. Click the joystick.
The FAD/BAL Setting Menu appears.
4. Adjust speaker balance by moving the joy-
stick.
The display shows “F 15” – “R 15” as it moves from
front to rear.
The display shows “L 09” – “R 09” as it moves from
left to right.
Adjusting Audio (Basic)