Maintaining the waterproof function, Remove the o-ring, Remove any sand, dirt, etc – Olympus PT-024 User Manual

Page 27: E-26 6. maintaining the waterproof function

Text mode
Original mode

E-26

6. Maintaining the Waterproof Function

Remove the O-ring.

Open the Case and remove the O-ring from the Case.
Removal of the O-ring

ᕃ Insert the O-ring removal pick between the O-ring and the wall of the

O-ring groove.

ᕄ Move the tip of the inserted pick under the O-ring. (Take care not to

damage the O-ring groove with the tip of the pick.)

ᕅ Hold the O-ring with your fingertips after it has come out of the

groove and remove it from the Case.

Remove any sand, dirt, etc.

After visually checking that dirt has been removed from the O-ring,
checking for attached sand and other foreign matter, as well as for
damage and cracks can be done by squeezing the entire circumference
of the O-ring lightly with your fingertips.

PT024_E.qxd 2004.4.20 10:33 AM ページE-26