Olympus PT-024 - Manual (Page 16)

E-15
Loading in the Case
Which digital cameras can be loaded?
This product (PT-024) is exclusively used for the CAMEDIA X-3.
Open the lens barrier.
When the lens barrier of the digital camera is opened, the power is
switched on.
When the selected time has elapsed without any operation, the
camera enters into sleep mode (standby condition). In this case,
press an operation button for cancellation of sleep mode.
Check the operation of the camera.
Confirm the operation according to the instruction manual for the
digital camera.
Open the Case.
Insert the buckle opener of the accessory into the buckle opening
lever as shown in the figure (in direction
ᕃ) Pull the buckle opener
slowly (in direction ᕄ). When not using the buckle opener, hold the
buckle opening lever with your thumb and index finger from the side
and pull it up slowly.
Pull up the mode dial of the case.
Pull up the mode dial of the case until it
stops, so that it does not interfere with the
mode dial of the digital camera.
PT024_E.qxd 2004.4.20 10:33 AM ページE-15