Agilent Technologies FS2010 - Manual (Page 25)

25
The FS2010 generates one output column that is sub-divided into the
following sub-columns.
Name Base Description
CMD TEXT The command type displayed in HEX
Wait The type of wait state
ADDR_H TEXT The address as it appears during a 64 bit
address transfer (as defined by a DAC)
ADDR_L HEX The address as it appears on the lower AD
lines (AD[31:0]). This HEX value is
incremented during burst transactions
Data_H TEXT The upper 32 bit AD lines representing data
Data_L TEXT The lower 32 bit AD lines representing data
Termination TEXT Termination type
CBE_H HEX Data byte enables for the upper 32 bit AD
lines (AD[63:32]).
CBE_L HEX Data byte enables for the lower 32 bit AD
lines (AD[31:0]).
The FS2010 Decode Software will perform the following functions:
♦ Decode all PCI-X command and cycle types
♦ Decode Attribute and Split Address fields for easy reading
♦ Color code the data and attribute to match the transaction type
(command). The colors used by the software are as follows:
♦ Memory:
Green
♦ Split Completions are colored according to the original request
command ID.
♦ I/O transactions: Yellow
♦ Configuration transactions: Blue
♦ Interrupt Acknowledge, Special Cycle transactions and the DAC
cycle: Purple
♦ Idle: White
♦ Wait cycles: colored in accordance with the rest of the
transaction
♦ Match the Request to the Response by printing the corresponding
address aligned with the data on a Split Response. In addition the
original command will be printed with the Split Response to indicate
what command was originally requested
Functionality of the
FS2010 Transaction
Decode Software