AEG Voxtel D215 combo - Manual (Page 9)

9
UK
7.1.2 Direct dialling
tPress to connect to the line and then enter the phone number.
Note:
If you enter a wrong digit you cannot correct it with the “C” (
) key.
7.1.3 Call from the phonebook
tPress ,
, OK to access the phonebook and press / to select the desired phonebook entry.
tPress to dial out the selected phonebook entry.
Note:
The alphanumeric keys provide a short-cut to find entries beginning with the corresponding letters.
7.1.4 Call from the call list (only available with caller display)
tPress
to access the call list and press / to select the desired call list entry.
tPress to dial out the selected call list entry.
7.1.5 Call from the redial list
tPress
to access the redial list and press / to select the desired redial number.
tPress to dial out the selected redial number.
7.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after dialling and remains on the
screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
7.2 Answer a call
If the handset is not on the charging cradle:
tWhen the phone rings, press to answer a call.
Note:
If “AUTO ANSWER” is set to “ON”, then lifting the handset off the base or charger will answer the call
automatically and no keys need to be pressed.
7.3 End a call
tDuring a call press to end the call.
OR
tPut the handset on the base station or charger to end the call.
7.4 Handset speakerphone
During a call, you can press to alternate between hands-free speakerphone and normal handset use.
7.5 Adjust volume
There are 5 levels (“VOLUME 1” to “VOLUME 5”) to choose from for each of the earpiece and speaker
volumes.
During a call:
tPress
/ to select volume 1-5. The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
7.6 Mute a call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press “C” (
) to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press “C” ( ) again to unmute the microphone.