AEG Voxtel D215 combo - Manual (Page 25)

25
UK
12 ANSWERING MACHINE (ONLY for D215
Your phone includes a telephone answering machine that records unanswered calls when it is on. The
display on the base will show the number of messages recorded.
The answering machine can store up to 59 messages within the maximum recording time of up to about
18 minutes, depending on the compression rate set.
As well as recording incoming messages, you can record memos for other users of your phone. If the
answering machine memory is full, the Handset will display “TAM FULL“ alternately with the handset’s
name or time, depending on the handset standby display mode set, and you will have to delete some
messages before any new ones can be recorded.
You can turn the answering machine on or off using the base or handset. When the answering machine is
set to ON, calls will be answered after the set answer delay and if the Answer and Record mode is set, the
caller can then leave you a message. When the answering machine is set to OFF, calls will be answered
after 14 rings and the answer only message will be played to your callers. They will not be able to leave
you a message.
Using the cordless handset:
12.1 Turn on/off the answering machine
You can turn the answering machine on or off using the handset.
When the answering machine is set to “ON”, calls will be answered after the set answer delay and the
caller can then leave you a message.
When the answering machine is set to “OFF”, calls will be answered after 14 rings and the answer only
message will be played to your callers. They will not be able to leave you a message.
tPress and
/ to select “ANS. MACHINE”.
tPress and
/ to select “TAM ON/OFF”.
tPress and
/ to select “ON” or “OFF”.
tPress to confirm.
>If answering machine is set to “ON”, displays on the handset LCD.
>If answering machine is set to “OFF”, will not display on the handset LCD.
12.2 Listen to the messages in the answering machine
When new messages are recorded on the answering machine, the flashes on the handset display
until all the new messages are played. After a new message is played it will be saved as an old message
automatically unless it is deleted.
Old messages will be played after all new messages are all played.
tPress and
/ to select “ANS. MACHINE”.
tPress and / to select “MSG PLAYBACK”.
tPress to start message playback through the earpiece and the screen displays the date and time
information of the message received.
Note:
A
is placed at the centre of the bottom of the handset display to indicate that it is a new message.
When a message has been played, the will disappear and will not be shown when you listen to this
message again.
Note:
If there are no messages, the handset display will briefly show “00-00 00-00“ then return to “MSG
PLAYBACK”.
tDuring message playback, press or to increase or decrease the message playback volume
respectively.