AEG Voxtel D215 combo - Manual (Page 13)

13
UK
All handsets registered to the base will produce the paging tone and “PAGING“ flashes on the screen.
You can stop the paging by pressing / /
on any handset or on the base to stop paging.
7.18 Make an Internal Call
This feature allows you to make internal calls, transfer external calls. If the called base or handset is not
answered within 60 seconds, the called base or handset will stop ringing and the calling one will return to
standby mode.
7.18.1 Intercom
Using the cordless handset:
1. In idle mode, press “C” ( ) and all the other registered handset numbers will display, along with a
„7“ and a „9“.
2. Enter < 7 > to call the base or enter the number of the handset that you want to call, or enter „9“ to
call all handsets and the base.
3. The called base rings and the corded handset must be lifted off the base to establish the internal call.
OR
3. The called handset rings and must be pressed on that handset to establish the intercom call.
Note:
If only one handset is registered to the base station, pressing “C” ( ) will call the base immediately.
Note:
If there is an external call while you are on an intercom call, you‘ll hear warning beeps, and you have to end
the intercom call, before you can answer the external call.
Using the corded base:
1. In idle mode, press and the registered handset numbers will display, along with a “9“.
2. Enter the handset number you want to call, or press “9“ to call all handsets.
3. The called handset rings. Press on the called handset to establish the internal call.
Note:
If only one handset is registered to the base station, pressing
will call the handset immediately.
7.18.2 Call all handsets
Using the cordless handset:
tIn idle mode, press
and the registered handsets will display.
tPress the “9“ key to ring to all registered handsets and the base.
Using the corded base:
tIn idle mode, press
and the registered handset numbers will display.
tPress “9“ to ring to all registered handsets and the base.
7.18.3 Transfer an External Call
Using the cordless handset:
During an external call:
1. Press to show “INTERCOM“.
2. Press to show all the other registered handset numbers, plus “9”. Enter the number for the handset
you want to transfer the call to.
3. The external call is put on hold automatically and the called handset rings.
4. Press on the called handset to establish an internal call.
5. Press on the calling handset or put the calling handset on the charging cradle to end the current call
with the external party.
6. The external call is transferred to the called handset.
Note:
If the other handset has not answered the intercom call, you can stop the intercom and return to the
external call by pressing .