Xerox DocuColor 7002-8002 con Xerox EX Print Server-16450 - Manual (Page 3)

Page 3
N OTE : If you switch to Color Wheel mode after adjusting color curves in Curves mode, all of
your curve adjustments are lost. A warning message appears before you lose your adjustments.
This occurs regardless of whether the changes come with the FreeFlow job, or are performed
manually on the job in Image Viewer.
Virtual Printers
The FreeFlow enablement supports Fiery Virtual Printers, which allow you to print to the
EX8002 using predefined settings saved as a special print queue. The Fiery administrator can
create virtual printers and publish them so that users can access them on the network. For
information about using virtual printers, see Command WorkStation Additional Information
in Utilities, which is part of the user documentation set.
N OTE : After you create a new Fiery Virtual Printer, you must restart the EX8002 to register
the new virtual printer with FreeFlow Print Path.
Tab printing Tab printing
Tab printing is supported for both full-cut and precut tabs. Precut tabs are supported for both
Page Inserts and Exception Pages. When used for Page Inserts, they map to the Fiery Insert
Tab feature found under Mixed Media. When used for Exception Pages, they map to the Fiery
Page Range feature found under Mixed Media.
For information about using Mixed Media, see Command WorkStation Additional
Information in Utilities, which is part of the user documentation set.
Printing Raster Document Object files that contain precut tabs
The EX8002 supports precut tabs in FreeFlow applications such as Makeready. To ensure
that the text prints on tabs, send the job directly to the EX8002 without previewing it in
Command WorkStation or changing the settings in Job Properties.
If the print job is sent as an RDO (raster document object) file, or processed through
Xerox PostScript conversion, the page size is not predefined, but the job prints correctly.
N OTE : Tabs must be programmed as 9 x 11-inch precut tabs, not 8.5 x 11-inch.
When you send an RDO file to the EX8002 and insert tabs in Command WorkStation, the
tab text does not print correctly on the right-hand side. To avoid this, insert tabs in FreeFlow
Makeready or send the job to Command WorkStation as a PDF (not RDO) file.
N OTE : The file must be saved with the .RDO extension. If you override the job name found in
Job Notes, make sure that the job name ends with the .RDO extension. An RDO file that
contains precut tabs must print to the EX8002 Print queue or Hold queue. Also, if you
process and hold the job in Command WorkStation, the job loses its precut tab attributes and
any text on the tabs does not print.