6 adding a device manually, Displaying the add device screen, To add a device manually – Konica Minolta BIZHUB C30P User Manual
Page 58: Adding a device manually
6 Configuring PageScope Net Care Settings
47
6.6 Adding a Device Manually
Devices that could not be detected when the
Start
button was clicked in
the
Device Discovery
section during the procedure described in
“6.5 Specifying the Device Discovery Range” (p. 39) can be added to
List Manager from the
Add Device
screen.
Displaying the Add Device screen
Double-click the
Add Device
icon (single-click in the HTML mode).
If you are using a Java mode and the
Server Setting
menu tree is not
expanded, double-click the following icons:
Server Setting
→
List
Manager
→
Add Device
.
To add a device manually
1.
In the
IP Address
box on the
Add Device
screen, type the IP
address of the device that you want to add, and then type in the
Port Number
box the number of the port used by SNMP.
2.
Type in the SNMP setting used when searching for the device to
be added.