Konica Minolta BIZHUB C30P - Manual (Page 45)

6 Configuring PageScope Net Care Settings
34
To configure Preference settings
1. Configure the settings described below as required.
Status Polling Interval Section
• Device List (min.) :
Type in the update interval, in minutes, for
information about devices displayed in the
device list.
SNMP Communication Setting Section
• Timeout (sec.) : Input the time in seconds that should be
allowed until the PageScope Net Care server
obtains information from a device following
an information request when there is an
update of information of a device displayed in
the device list.
• Retries : Input the number of retries that should be
attempted when an attempt to obtain
information from a device fails.
2. After everything is the way you want, click the Apply button. To
cancel your settings, click the Cancel button instead of Apply .