1 starting up client, Starting up client, 3 using pagescope net care client – Konica Minolta BIZHUB C30P User Manual

Page 26

3 Using PageScope Net Care Client

The following operation is explained using the Java mode.

3.1 Starting Up Client

Start up your Web browser and access the URL shown below.

http://server_name:port_number/

In place of “server_name” in the above URL, type in the name or IP
address of the host that is running the PageScope Net Care server.

Example: When the IP address of the PageScope Net Care server is
192.9.200.200 and the port number is 9090 (the default port number is
“9090”.)

http://192.9.200.200:9090/

Note

• If

SSL Enabled/Disabled

in the

SSL Setting

section is set to

Enabled

(as described in “6.14 Specifying Security Settings for

server_name

>:<

port_number

>/”.

This manual is related to the following products: