Konica Minolta KIP 9000 - Manual (Page 46)

Chapter 2 Basic Operations 2-23
2. 7 Initial Cut (Straighten the leading edge
of roll media)
The leading part (240mm) of roll media can be cut off to have a straight edge.
Initial Cut can be performed with SELECT Key, CUT Key and Roll Deck Indicator on the Operation
Panel.
Roll Deck Indicator
SELECT Key CUT Key
1. Pressing the SELECT Key, select the roll media to which the Initial Cut is to be performed.
COPY DENSITY MENU ENTER ONLINE
MF
D1
D2
D3
EXIT PAPER DECK
1 2 3 4
SELECT CUT WIRE CLEAN EXP- CLEAN
D4
PF
PAPER DECK
1 2 3 4
SELECT CUT
PAPER DECK
1 2 3 4
SELECT CUT
Leading part of roll media