Konica Minolta KIP 9000 - Manual (Page 106)

Chapter 3 Error Correction & Maintenance 3-5
4. Insert the leading edge of media between feeding rollers, and rotate the upper feeding roller to
pinch the leading edge (1-2cm) with the rollers.
5. Close the Roll Deck.
6. Select the concerning Roll pressing the SELECT Key, and press the CUT Key to take Initial
Cut.
SELECT Key CUT Key
COPY DENSITY MENU ENTER ONLINE
MF
D1
D2
D3
EXIT PAPER DECK
1 2 3 4
SELECT CUT WIRE CLEAN EXP- CLEAN
D4
PF
Feeding rollers