Konica Minolta KIP 9000 - Manual (Page 132)

Chapter 3 Error Correction & Maintenance 3-31
3. 4 Service Call Errors
If the KIP9000 has any abnormal error which the user can not fix, the Status Display indicates
Service Call Errors as “E-XX”. As KIP9000 can make no more printing unless the error is cleared,
call the service personnel immediately.
Status Display (E-XX)
Try to turn on/off the KIP9000 before calling for the service as sometimes the error can be cleared.
If “E-XX” is indicated again, turn off and unplug the KIP9000, and call the service personnel
immediately with informing him which of the following error codes is indicated.
Error codes Error
E-01 Fuser temperature rising error
E-02 Abnormal fuser temperature
E-05 Drum motor error
E-06 Counter A / B error
E-07 Cutter motor error
E-09 Web End Error
E-13 Paper feed motor error
E-14 Fuser motor error
E-16 Wire cleaning motor error
E-21 Fuser thermostat error
E-23 LED head cleaning motor error
E-26 Surface Potential Control Error
E-27 Density Sensor Error
E-28 Density Control Error
E-30 Developer Disconnection Error
E-43 RFID (IC Tag) Error
E-49 Developer pusher motor error
E-F0 Folder Error
E-Fb Flash ROM Error
COPY DENSITY MENU ENTER ONLINE
MF
D1
D2
D3
EXIT PAPER DECK
1 2 3 4
SELECT CUT WIRE CLEAN EXP- CLEAN
D4
PF
NOTE
If E-26 or E-28 is indicated, it may be possible to clear it temporarily by easing the error check
level in the User Modes. See the following each pages.
[2.8.13 User Mode D (Error check level for E-26 error)] on page 2-66
[2.8.14 User Mode E (Error check level for E-28 error)] on page 2-69