Konica Minolta bizhub PRO 950 - Manual (Page 45)

Basic Printing and Common Printing Functions
bizhub PRO 950 Printer Driver 5-2
The print job is sent from your computer to the image controller and
then processed by the controller.
5.1.2 Basic Printing from Mac OS X
After a document has been created in an application, it can be printed on a
copier.
Printing the document is initiated in the Print dialog, which calls the printer
driver to generate a PostScript data stream, the job. The data stream
represents the elements on the document pages. It is amended by detailed
instructions for processing, the job ticket. The job ticket contains
information like page size and orientation, number of copies, tray selection,
imposition and finishing modes.
To print a document, select [Print] from the [File] menu.
The popup labeled Printer allows you to select the printer which
corresponds to the target copier.
The popup labeled Presets allows you to save and load your own named
combinations of settings. To save the current settings, select [Save as …]
and enter a name for them. After this, the saved settings can be selected
by this name from the popup.
The unlabeled third popup allows you to select a panel of the Print dialog,
including the panels of the printer driver Plug-in.
In the Copies and Pages panel, you can select the following options:
The range of pages to be printed
The number of copies to be printed
In the Paper Feed panel, you can select the following options:
All pages from – the tray to be used for printing. Autoselect means the