Konica Minolta bizhub PRO 950 - Manual (Page 17)

Overview
bizhub PRO 950 Printer Driver 2-3
2.3 Connection of the Image Controller
You can use the copier as a printer by connecting image controller to a
network (Using with Ethernet connection) or a computer (USB connection).
2.3.1 Ethernet Connection
You can also connect the copier to computers supporting Ethernet.
Several alternatives can be considered in the Ethernet connection. In any
of them, you must set up the printer driver in each computer after
configuring the network (such as TCP/IP settings) for the image controller
or the computers.
The following print patterns are shown here as examples.
• SMB printing, LPR/LPD printing, Direct printing, Raw (Port9100)
printing, Web Service printing
• Printing in which AppleTalk and Bonjour from Macintosh is used.
• IPP (Internet Printing Protocol) printing
• Printing in which Novell NetWare is used.
2.3.2 USB Connection
You can connect your computer to the image controller via the USB port
(USB 2.0).