Konica Minolta KIP 2100 Scanner - Manual (Page 43)

Section 2 Copy Mode - Monochrome 2-15
2.5.4 Stamp
Select “Stamp” to display another sub screen. This will allow the selection of a
“Stamp” or “Water Mark” to be placed on the scanned image. It will be imbedded into
the image.
a) Use the Arrow buttons to scroll through
the available stamps and select the
desired stamp from the list.
b) The Stamp button will now display the stamp selected.
c) Select OK.
NOTE
The list of “Stamps” is loaded into Copy Mode by the system administrator or key
operator. They can not be altered or modified in any manner on the KIP printer’s
UI.
Please contact these persons for any additional stamps that may be required.
Please see “KIP Request” for these functions.