Konica Minolta KIP 2100 Scanner - Manual (Page 11)

Chapter 1 Basic Functions 1-6
1. 4 Specifications
Model KIP 2100
Type Desktop
Scanning method
Sheet through type
Reading sensor CCD Reduction Optical Unit (3 Units)
Light source Cold Cathode – Fluorescent lamp
Maximum reading width 914.4mm or 36” (21600 pixels)
Interface USB 2.0
Memory capacity Standard 256MB
Maximum 2GB (Option)
Input power Voltage 100 to 240V (+/-10%)
Current 6A
Frequency 50/60Hz
Power consumption 240W
Environmental conditions 10 - 32.5 C ( 50 – 90F), 20 - 85 percent RH (No condensing)
Acoustic noise
Less than 60db
Outer dimension 1,368mm (Width) x 489mm (Depth) x 266mm (Height)
54” x 20” x 11”
Weight About 68kg ( 150 lbs )
Original thickness 0.05mm to 1.6mm (50g to 120g/centare)
NOTE
The KIP 2100 accepts the inlet voltages of 100 to 240VAC
without additional voltage transformation.
NOTE
These specifications are subject to change without notice.
NOTE
Make sure to select 50% or larger zoom ratio when the original
is 1.2mm or thicker.