Konica Minolta KIP 2100 Scanner - Manual (Page 12)

Chapter 1 Basic Functions 1-7
1. 5 Name of Each Part and Its Function
1. 5. 1 Front view
No. Name Function
1 Lever Pull up the Lever to unlock and open the Upper Unit.
2 Original Table Put the original on the Original Table - face down.
3 Tray These Trays receive the original ejected from the scanner after
the scan.
4 Power Switch Press “I” side of the Power Switch to turn on the KIP 2100, and
press “O” side to turn it off.
5 Original Receiver Place a rolled original on the Original Receivers, and feed it for
scanning from this position. ( with optional stand only )
6 Original Guide Feed the original along the Original Guide so not to skew it.
1 2 3
4 5 6