Konica Minolta KIP 2100 Scanner - Manual (Page 130)

6-10 Section 6 ?” Screen
Page 2 of 5
4.4 Master Lead / Trail Adjustment
The leading and trailing edges on copies or scans can be
adjusted to best suit user requirements. This adjustment adds
or removes image / media from all scans and copies and
should be considered a default setting of such.
4.5 Test pattern
A variety of test patterns may be printed from the KIP printer operator panel
on an on-demand basis. The following four predefined test patterns are
available to assist in pen table selection and overall quality verification.
36” x 60” tif – Used to test long printing and calibrate scan/copy operations
17” x 11” plt – Used to calibrate lead/trail edge settings
36” x 24” plt – Used to calibrate lead/trail edge settings
36” x 24” hprtl – Used to test output of mixed raster and vector data