Konica Minolta Magicolor 2450 - Manual (Page 190)

Configuring the Printer 174
SNMP
TRAP Enable
Trap If this check box is selected, the Trap parameters
(below the check box) are enabled.
Default: [Not checked]
Community Sets the community of the printer.
Default: public
Trap IP
Address Sets IP address of the printer.
Default: 255.255.255.255
Submit button Saves and applies any changes made.
Reset button If you made changes to any of the parameter set-
tings but don’t wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Item Description