Setting the address manually, Setting the address manually 102, Caution – Konica Minolta Magicolor 2450 User Manual

Page 118

Network Connection

102

Setting the Address Manually

You may also manually change the printer’s IP address, subnet mask, and
gateway by using the following instructions. (See chapter 5, “Understanding
the Ethernet Configuration Menus” for more information.)

When the IP address is changed, add a new port or reinstall the
printer driver.

CAUTION

You should always notify your network’s administrator before changing
the printer’s IP address.

Turn on your PC and printer.

When the printer’s message window displays

IDLE

, set the IP address.

Press this
key . . .

(until) the message window reads . . .

IDLE

PROOF/PRINT

or if no optional hard disk is installed:

PRINT MENU

INTERFACE MENU

TCP/IP

IP ADDRESS