Konica Minolta Magicolor 2450 - Manual (Page 120)

Network Connection 104
4
If you don’t want to set the subnet mask, go to step 5.
If you want to set the subnet mask, follow these steps.
5
Save your configuration changes and make the printer ready for printing
again.
6
Print a configuration page to verify that the correct IP address, subnet
mask, and gateway have been set.
Press this
key . . . (until) the message window displays . . .
SUBNET MASK
255.255.255.000
SUBNET MASK
255.255.255.000
Use the and keys to move to each of the four number triplets.
Use the and keys to increase or decrease each number.
SUBNET MASK
xxx.xxx.xxx.xxx
Press this
key . . . (until) the message window displays . . .
Press the key 4 times to return to
READY
Press this
key . . . (until) the message window displays . . .
IDLE