Konica Minolta magicolor 3730DN - Manual (Page 48)

Media Types 4-5
– Paper that has been printed on with a heat-transfer printer
– Paper that has been printed on with any other printer or fax machine
„ Dusty
„ Wet (or damp)
"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
„ Layered
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m 2 is referred to as thick stock. You can print continu-
ously with thick stock. However, this could affect the media feed, depending
on the media quality and printing environment. If problems occur, stop the
continuous printing and print one sheet at a time.
Capacity Tray 1
(Manual Feed
Tray) 1 thick stock sheet.
Tray 2 Up to 20 thick stock sheets, depending on
their thickness.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up