Konica Minolta magicolor 3730DN - Manual (Page 143)

Solving Other Problems 7-28
Media is
wrinkled. The media is moist
from humidity or hav-
ing water spilled on it. Remove the moist media and replace it
with new, dry media.
The transfer roller or
fuser unit is defective. Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 4-2.
The pages
that were fed
out were not
uniformly
loaded. There are large curls
in the paper. Remove the paper from the paper tray,
turn it over, and then load it again.
There are gaps
between the media
guides of the paper
tray and the sides of
the paper. Slide the media guides of the paper
tray against the sides of the paper so
that there are no gaps.
Symptom Cause Solution