Konica Minolta magicolor 3730DN - Manual (Page 150)

Status, Error, and Service Messages 7-35
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
This message... means... do this...
CALIBRATION
After replacing a toner car-
tridge or after rebooting your
printer after environmental
changes, your printer auto-
matically pauses to do an
Auto-Image Density Control
(AIDC) cycle. This process
is provided to make reliable
printer operation with opti-
mum output quality possible. No action needed.
CANCELLING JOB
The job is being cancelled.
ENERGY SAVER
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power.
CONTROLLER FW
UPDATING
The firmware is being
updated.
ENGINE FW UPDATING
CONTROLLER FW
DOWNLOADING
The firmware is being down-
loaded.
ENGINE FW DOWN-
LOADING
CONTROLLER FW DWLD
COMPLETE
Downloading of the firmware
is finished.
ENGINE FW DWLD
COMPLETE
PRINTING
The printer is printing.