Konica Minolta magicolor 3730DN - Manual (Page 151)

Status, Error, and Service Messages 7-36
Error Messages
PROCESSING
The printer is processing
data. No action needed.
READY
The printer is on and ready
to receive data.
REBOOTING
The printer is being
restarted.
WARMING UP
The printer is warming up.
WAITING
While data is being pro-
cessed, there was an inter-
ruption of at least one
second in the data.
This message... means... do this...
FUSER LIFE LOW
The time to replace
the fuser is near. Prepare the replacement
fuser.
FUSER LIFE END
The fuser unit has
reached the end of its
life. Replace the fuser unit
and reset the counter in
the
ENGINE SERVICE
/ ENGINE SUP-
PLIES REPLACE /
SUPPLIES REPLACE
FUSER UNIT menu.
"
Printing can
continue,
however, the
printing result are
not guaranteed.
INCORRECT
X T/C
The X toner cartridge
is an unapproved
type. Install a
KONICA MINOLTA toner
cartridge of the appropri-
ate type (AM, EU, AP or
GC). See page 5-7.
SIZE MISMATCH
The media size set in
the printer driver is
different from the
size/type of media
loaded. Load media of the cor-
rect size.
This message... means... do this...