Konica Minolta magicolor 3730DN - Manual (Page 154)

Status, Error, and Service Messages 7-39
SIZE/TYPE ERROR
DUPLEX
The loaded media
cannot be used with
duplex (dou-
ble-sided) printing. Make sure that the cor-
rect media is being
used.
ERROR
VIDEO UNDER RUN
The print image is too
detailed for the trans-
mission speed. Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed, and
then try printing again.
ERROR
FW DOWNLOAD
Firmware download-
ing failed. Try downloading again.
ERROR
MEMORY OVERFLOW
The printer has
received more data
than can be pro-
cessed with its inter-
nal memory. Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed, and
then try printing again.
MEDIA JAM
DUPLEX LOWER
Media has misfed in
the duplex. Refer to “Media Misfeed
Messages and Clearing
Procedures” on
page 7-6, and remove
the misfed media.
MEDIA JAM
DUPLEX UPPER
Media has misfed in
the duplex.
MEDIA JAM
TRANSFER ROLLER
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
MEDIA JAM
TRAY1
Media has misfed in
Tray 1.
MEDIA JAM
TRAY2
Media has misfed
while being pulled
from Tray 2.
MEDIA JAM
EXIT
A media misfeed has
occurred at the media
outlet slot.
MEDIA JAM
UNDEFINED
A media misfeed has
occurred at an
unspecified location.
This message... means... do this...