Konica Minolta bizhub PRO 1050P - Manual (Page 50)

46
Using Perfect Binder PB-502
The machine with the optional Perfect Binder PB-502 installed automatically
attaches a copied set with a cover sheet to make a perfect-bound book, applying a
dab of glue in the center line of the cover sheet to fix the spine.
In the Perfect Binding mode, both simplex and duplex copying are available for the
body set, and also the cover sheet can be blank, simplex-printed or duplex-printed,
and even trimmed to match with the thickness of the body set to cover.
The binding direction can be selected from left and right.
• Use only the paste GC-501 for this binder.
• Handle melted hot paste only with great care.
• In order to prevent degradation of paste owing to heating, ensure that the
machine is turned off when it is not in use. It is recommended that you
adjust the time settings for the low power mode and shut-off mode to the
main body to suite the usage of the Perfect Binder, since they apply to the
binder as well.
Cover trimming
Body set
Cover
Head
Foot
Spine width Front side of Front cover
Front side of Back cover
Back side of Front cover
Cover lead edge
adjustment
Back side of Back cover
Left binding
(When right binding,
the cover is upside down.)