Konica Minolta bizhub PRO 1050P - Manual (Page 43)

Using Folder/Finisher Functions Manually (continued)
39
3.
Press the Start/Stop button.
If multi-feeding is detected and the machine stops even if single sheet is
fed, press the Multi-Feed Detection button to turn on the lamp below.
To interrupt the operation, press the Start/Stop button again.
Using Fold&Staple mode, the finished sets will be delivered to the saddle
stitcher tray of Saddle stitcher SD-506. Be sure to withdraw the saddle stitcher
tray, and open the tray stand when fully withdrawn. See p. 42 for details.
Copies will be delivered to the primary (main) tray of Finisher FS-503. Be
careful not to exceed the finisher tray capacity when selecting the print
quantity, otherwise unexpected trouble may be caused.
To fold or fold&staple booklet-styled prints manually, arrange the printed
sheets as shown below before placing them into the post inserter.
Start/Stop button
Multi-Feed Detection button
ON
OFF
48
47
2
1
26
25
24
23
26
25
24
23
48
47
2
1