Konica Minolta bizhub PRO 1050P - Manual (Page 35)

Using Folding Unit FD-503 (continued)
31
Punching File Holes in Copies (1050/1050e only)
Copies will be punched in this mode. Follow the procedures below to select 2- or 3-
hole punch and punch position.
1.
Touch
Punch on the Copy Screen
The Output Application Icon shows the number of punch holes and punch
position.
If you want to change number of punch holes and position, proceed to the
following steps.
2.
Touch
Output Application.
The Output Application Screen appears.