Konica Minolta bizhub PRO 1050P - Manual (Page 48)

Using Saddle Stitcher SD-506 (continued)
44
2.
Touch
Multi Center or Multi Letter to select it.
If
Multi Center is selected, the Multi Center Screen will be displayed to
specify whether or not to trim the edge of the folded sheets.
Touch
Trimming or Non Trimming to select it.
Touch
OK. The Output Application Screen will be restored.
If
Multi Letter is selected, the Multi Letter Screen will be displayed to
specify the print side.
Touch
Outside Print or Inside Print to select it.
Touch
OK. The Output Application Screen will be restored.
If you touch Cancel, the previous setting will be restored.
Touching
Function Off will deselect the mode, however, the specified setting
will be kept in memory.
3.
Touch
OK on the Output Application Screen.
The output icon of the selected output mode will be displayed on the Copy
Screen.
With Multi Center selected, Booklet function in the Application setting has
been selected automatically.