Configuring the printer (administrator mode) 7-105 – Konica Minolta magicolor 1650EN User Manual
Page 290
Configuring the Printer (Administrator Mode)
7-105
Read/
Write
Account
User Name Specifies the reading/writing user name.
Range: Up to 32 characters
Default: restrict
"
The same name specified as the Discovery
user name cannot be used.
Authentica-
tion
Password
Specifies the reading/writing user authentication
password to be used for authentication.
Range: 8 to 32 characters
Default:
Privacy
Password
Specifies the reading/writing user privacy password
to be used for privacy (encryption).
Range: 8 to 32 characters
Default:
Security
Level
Specifies the security level for reading/writing user.
Choices: noAuthNoPriv, authNoPriv, AuthPriv
Default: AuthPriv
SNMP
TRAPS
Enable
Traps
Specifies whether or not to permit the Trap settings
Choices: Enable, Disable
Default: Enable
Enable
Authentica-
tion
Failure
Traps
Specifies whether to enable or disable the Trap set-
tings when authentication failed.
Choices: Enable, Disable
Default: Disable
Trap Com-
munity
Name 1
Specify the community name for the SNMP trap.
Range: Up to 15 characters
Default: public
Trap IP
Address 1
Specify the IP address of the SNMP trap receiver.
An IPv4 or IPv6 address or a FQDN can be speci-
fied.
Range: Up to 255 characters
Default: 0.0.0.0
Trap UDP
Port
Number 1
Specify the port number of the SNMP trap.
Range: 1 - 65535
Default: 162
Trap Com-
munity
Name 2
Specify the community name for the SNMP trap.
Range: Up to 15 characters
Default: public
Item
Description